eShop
Sign in
English
GUF Series Wound Filter Cartridge
Cobetter High Service Time Guard Filter Cartridge (GUF) is made of polypropylene non-woven. It provides excellent life time and efficiency ,which is 2-3 times of general Melt-blown filters. It is an exceptional value for general applications where long life, high dirt-holding and low change-out frequency are required. Suitable for water treatment industry.
Recommended Applications：
Request a Quote
Description
Features
- Multi-layer gradient of 100% pure polypropylene membrane entwined,with exceptional dirt-holding capacity and higher efficiency.
- 2-3 times service life of general Melt-blown filters.
- No Wetting agents, solvents, antistatic agents or binders and the raw materials meet NSF.
- Reduce filtration system cost,with high cost performance.
- With pp core inside,which has more stronger compression capacity.
Applications
- RO pre-filtration
- Potable water filtration
- Cooling water system
- Plating baths
- ......
Specifications
Material of Construction
| Filter/Medium | Polypropylene |
| Core/Cage/End Cap | Polypropylene |
| O.D | 64mm |
| I.D | 30mm |
Operating Conditions
| Max. Operating Temperature |
80°C |
| Max. Differential Pressure |
0.3 MPa/21°C 0.21 MPa/80°C |
| Recommended Working Flow Rate | 0.5m³/h (10"） |
Flow Rate Characteristics
Efficiency Comparison
| Particles | GUF 5μm | US "P" MBC | US "M" MBC | US "G" MBC | General MBC |
| ≥2μm | 26.48% | 14.49% | 12.85% | 9.81% | 1.57% |
| ≥5μm | 64.21% | 43.11% | 36.44% | 35.38% | 5.36% |
| ≥10μm | 98.84% | 86.74% | 82.27% | 64.87% | 27.41% |
| ≥15μm | 99.88% | 94.71% | 92.73% | 88.60% | 40.38% |
| ≥25μm | 100% | 100% | 100% | 98.21% | 85.02% |
Service Time Comparison
| Brand List | Service Time Percentage(%) |
| GUF | 90 |
| US "P" MBC | 75 |
| US "M" MBC | 80 |
| US "G" MBC | 78 |
| General MBC | 17 |
Flow Rate Comparison
| Brand List | Flow Rate Percentage(%) |
| GUF | 100 |
| US "P" MBC | 75 |
| US "M" MBC | 85 |
| US "G" MBC | 80 |
| General MBC | 25 |
End Cap
Ordering Information
| Type | O.D | Removal Rating | End Cap | Nominal Length | Seal Material | Industry |
| GUF | Blank 64mm | 0050 0.5µm | N No Gasket (Default) | 05 5 inch | S Silicone | C |
| 68 68mm | 0100 1.0µm | H PE Caskets | 10 10 inch | E EPDM | ||
| 0200 2.0µm | TC 222/Flat | 20 20 inch | V Viton | |||
| 0300 3.0µm | TF 222/Fin | 30 30 inch | P Encapsulated Viton | |||
| 0500 5.0µm | SF 226/Fin | 40 40 inch | ||||
| 1000 10µm | SC 226/Flat | |||||
| 2000 20µm |
* Example：GUF0050N05SC (GUF，64mm，0.5µm，No Gasket，5 inch，Silicone，Industrial)
