eShop
Sign in
English
HF150 Series High Flow Filter Cartridges
Cobetter High Flow Filter is a large diameter, single open ended pleated cartridge filter. With a 6"/152mm diameter, large filtration area,and
high flow rate up to 90m³/hr. It can be widely used in a wide variety of industry with less downtime for change-out.
Recommended Applications：
Request a Quote
Description
Features
- High density pleated filter type resulting in a high filtration area,high flow rates, longer service life, and high dirt holding capacity.
- Multi-layered design provides gradient filtration.
- Internal PP core guarantees no distortion and resists higher reverse differential pressure.
- Ergonornically designed handle facilities fast and easy installation and remove without special tools.
Applications
- Industrial: Municipal Water, Pre-RO Filtration, Reclaimed Water, Coolants, Nozzle Protection, Boiler Condensate
- Chemical: Quench Water, Aqueous Salt Solutions, Final Products
- Petrochemicals: Water-flooding, Produced Water, Enhances Oil Recovery, Completion Fluids, Amine Sweetening, Finial Products
- Electronics: Pre-RO Filtration, Process Water
- Food & Beverage: Process Water
- Pharmaceutical: Process Water
Specifications
Materials of Construction
| Filter Media | Support/Drainage | End Caps | Core | Outside Material | |
| PP | Pleated Polypropylene depth structure | Polypropylene | Glass filled polypropylene | Polypropylene | PP Cage (HFPP150 Series) |
| GF | Rein bonded glass fiber/Polyester support | Polyester | Glass filled polypropylene | Polypropylene | PET Net (HF150 Serise) |
Recommended Operating Conditions
| Max. Temperature | PP: 80°C GF: 121°C |
| Max. Pressure | 0.40 Mpa/21°C HFPP150 (PP Cage) 0.38 MPa/21°C HF150 (PET Net) 0.15 MPa/80°C |
Flow Rate
| Length | Design Flow Rate | Max Flow Rate |
| 20" | 15 m³/h | 30 m³/h |
| 40" | 30 m³/h | 60 m³/h |
| 60" | 45 m³/h | 90 m³/h |
| 80" | 60 m³/h | 120 m³/h |
Retention Ratings
| Polypropylene (PP) | 1.0, 2.0, 5.0, 10, 20, 40, 70, 90µm |
| Glass Fiber (GF) | 0.8, 1.0, 3.0, 5.0, 15, 25µm |
Retention Characteristic
| Particle Size | Filtration Efficiency HF150NB | ||||||
| PP0.8 | PP1.0 | PP2.0 | PP3.0 | PP5.0 | PP10.0 | PP20.0 | |
| ≥1μm | 99.89% | 99.82% | 95.00% | 86.97% | 79.86% | 42.23% | 24.38% |
| ≥2μm | 99.97% | 99.87% | 98.64% | 96.84% | 90.09% | 70.49% | 40.09% |
| ≥5μm | 100.00% | 99.93% | 99.90% | 98.86% | 98.36% | 82.26% | 76.66% |
| ≥8μm | 100.00% | 100.00% | 99.97% | 99.20% | 98.88% | 95.25% | 82.60% |
| ≥10μm | 100.00% | 100.00% | 100.00% | 99.58% | 99.39% | 98.18% | 89.42% |
| ≥12μm | 100.00% | 100.00% | 100.00% | 99.78% | 99.57% | 98.76% | 97.41% |
| ≥25μm | 100.00% | 100.00% | 100.00% | 100.00% | 100.00% | 99.34% | 99.14% |
Flow Rate Characteristics
Performance Comparison Table I
Performance Comparison Table II
Filters Quantities vs Same Filter Capacity
Change-Out Time
Reduce the number of filters by 90%,
Decrease the volume of housing by 50%,
Easier operation and change-out.
End Cap Configuration
Ordering Information
| Type | Filter Media | Efficiency Rating | Length | Seal |
| HFPP150 PP Cage | PP | 0050 0.5µm | 20 20 inch | S Silicone |
| HF150NB PET Net | GF | 0080 0.8µm | 40 40 inch | E EPDM |
| HFM150 | 0100 1.0µm | 60 60 inch | V Viton | |
| DSHF150 | 0200 2.0µm | |||
| G1HF150 | 0300 3.0µm | |||
| N1HF150 | 0500 5.0µm | |||
| N2HF150 | 1000 10µm | |||
| N3HF150 | 1500 15µm | |||
| N4HF150 | 2000 20µm | |||
| N5HF150 | 4000 40µm | |||
| JL-150 | 7000 70µm | |||
| 9000 90µm |
*Example：HFPP150PP0050P20SC (HFPP150，PP，0.5µm，20 inch，Silicone)
