eShop
Sign in
English
PSSF Pleated Stainless Steel Felt Cartridges
Cobetter PSSF Stainless Steel Pleated Felt Filter Cartridges are composed of stainless steel sintered felt shaped during the pleating process. These filters have a large filtration area with high flow rates and low pressure drops.
The unique stainless steel sintered felt is made from stainless steel fibers which have been sintered to form a high porous depth filtration material.
PSSF Filter Cartridges features include a graded pore size from coarse (upstream) to fine (downstream), which results in a higher dirt holding capacity with excellent filtration efficiency and longer service life. These filters are widely used in steam filtration or liquids with high viscosities, e.g. sugars and syrups.
Recommended Applications：
Request a Quote
Description
Features
- Absolute-rated
- All stainless steel construction excellent chemical compatibility
- Excellent chemical compatibility and high temperature resistance
- Specialized alloy for high corrosion and oxidation resistance
- Corrosive and oxidation resistant
- High dirt holding capacity and long service life
Specifications
Material of Construction
| Filter Media | 316L Stainless Steel Felt |
| Cage/Support | 316L Stainless Steel |
| Core/End Caps | 316L Stainless Stee |
Operating Conditions
| Recommended Continuous Operating Temperature Range |
-75°C to +200°C Note: Temperature dependant on o-ring compound |
| Max. Differential Pressure | 5.0 bar / 21°C (forward flow) 2.0 bar / 21°C (reverse flow) |
| Hot Water Sterilization | 85°C/30min @ Max. Differential Pressure of 2bar |
| Cleaning Solution | Reverse Rinse by Pure Water/Compressed Air @ ≤2bar; Ultrasonic Rinsing |
| Effective Filtration Area | 0.12m² / 10inch |
Parameters
| Removal Rating in Liquid μm |
Removal Rating in GAs μm |
Pore Efficiency % |
Dirt Holding Capacity mg/cm² |
Average Air Pemeability① L/dm²min |
Flow Rate② m³/h |
| 3.0③ | 0.5 | 70% | 7.9 | 10 | 0.8 |
| 5.0 | 1.0 | 75% | 5.0 | 47 | 1.3 |
| 7.0 | 1.5 | 76% | 6.5 | 63 | 1.6 |
| 10.0 | 2.0 | 75% | 7.8 | 105 | 2.0 |
| 25.0 | 16 | 80% | 19.0 | 355 | 2.5 |
| 40.0 | 25 | - | - | - | - |
| 60.0 | 45 | - | - | - | - |
①Testing Performed According to GB/T5453; Testing DP is 200Pa; Testing Medium is Air
②Testing Liquid Viscosity is 1CP.S; Filter Tested with 60mm diameter and 300mm length; Testing Pressure is 1.5 bar
③Bekaert Filtration Media
Retention Rates: PSSF v. TIC Titanium Filter
| PSSF | TIC Titanium Filter | |
| Materia | SS Sintered Felt (no ber releasing) | Metal Powder Metal Powder (will release after long term use) |
| Strength | Pleated Structure High Temperature & Pressure Resistance | High Temperature (Sintered) Unstable Pressure |
| Retention Rates | Absolute-Rated EFA: up to 0.12m² | Depth Filter EFA: 0.056m² |
Notes on Cleaning
Ultrasonic cleaning is recommended rather than back flush cleaning due to its depth and porous filtration media construction
Ordering Information
| Series | Removal Ratings | End Cap | Nominal Length | Diameter | Seal Material | Industry |
| PSSF | 0200 2.0µm | DOE Double Open End | 05 5 inch | D25 25mm | S Silicone | C |
| 0300 3.0µm | TC 222/Flat | 10 10 inch | D30 30mm | E EPDM | F | |
| 0500 5.0µm | TF 222/Fin | 20 20 inch | D50 50mm | V Viton | P | |
| 0700 7.0µm | SC 226/Flat | 30 30 inch | D65 65mm | P PFA | ||
| 1000 10µm | SF 226/Fin | 40 40 inch | D70 70mm | F PTFE | ||
| 2500 25µm | L Screw | |||||
| 4000 40µm | ||||||
| 6000 60µm |
*Example：PSSFW0200DOE05D65SF (PSSF，2.0µm，Double open end，5 inch，25mm，silicone，Chemical)
